|
Plug/Receptacle Type
|
Basic Designation
|
Structural Features
|
Remarks
|
Page No.
|
|
Crimp Type
|
Basic Type
|
Plug J30J-TJ
Receptacle J30J-ZK
|
Metal shell,wire crimp termination,straight cable outlet
|
Locking component types may
be selected
according
to specific
requirements
|
|
|
Modified Type
|
Plug J30J-TJ-A
Receptacle J30J-ZK-A
|
Compared with J30J-ZK/TJ products,a straight
cable clamp is added at the rear of the product, and the cable is covered with a metal protective sleeve
|
|
|
Plug J30J-TJ-C
Receptacle J30J-ZK-C
|
Compared with J30J-ZK/TJ products,the wire exits at a 90°angle
|
|
|
Plug J30J-TJ-C1
Receptacle J30J-ZK-C1
|
On the basis of the original J30J series crimp-wire products,an angled cable clamp is added, the wire bundle is covered with a metal
protective sleeve,and there is one cable outlet on the same side
|
|
|
Plug J30J-TJ-C2
Receptacle J30J-ZK-C2
|
Compared with J30J-ZK-C1/TJ-C1 products,the
outlet direction is opposite;all other features are the same
|
|
|
Plug J30J-TJ-C3
Receptacle J30J-ZK-C3
|
On the basis of the original J30J series crimp-wire products,an angled cable clamp is added, the wire bundle is covered with a metal
protective sleeve,and there are two cable outlets on the same side
|
|
|
Plug J30J-TJ-C4
Receptacle J30J-ZK-C4
|
On the basis of the original J30J series crimp-wire products,an angled cable clamp rear cover is added,and there are cable outlets on both
sides
|
|
|
Plug J30J-TJ-D
Receptacle J30J-ZK-D
|
Compared with J30J-ZK/TJ products,an anti-rotation slot is added to the square flange
|
|
|
Plug J30J-TJ-AD
Receptacle J30J-ZK-AD
|
Compared with J30J-ZK/TJ-A products,anti-slip
grooves are added on the side of the shell,and an anti-rotation slot is added to the square flange
|
|
|
Plug J30J-TJ-Q
Receptacle J30J-ZK-Q
|
Compared with J30J-ZK/TJ products,the shell square flange and mounting dimensions are
enlarged to the corresponding dimensions
|
|
|
Plug J30J-TJ-Q8
Receptacle J30J-ZK-Q8
|
Compared with J30J-ZK/TJ products,the shell square flange and mounting dimensions are
enlarged to the corresponding dimensions
|
|
|
Plug J30J-TJ-AQ8
Receptacle J30J-ZK-AQ8
|
Compared with J30J-ZK-A/TJ-A products,the
shell square flange and mounting dimensions are enlarged to the corresponding dimensions
|
|
|
Solder Type
|
Plug J30J-TJS
Receptacle J30J-ZKS
|
Compared with J30J-ZK/TJproducts,the contact termination form is solder cup type
|
|
|
|
Straight PCB Type
|
Plug J30J-TJN
Receptacle J30J-ZKN
|
The contact termination form is changed to straight PCB type,with PCB grid spacing
2.54*2.54,recommended PCB thickness (1.6-2.5 mm)
|
|
|
|
Plug J30J-TJN-J
Receptacle J30J-ZKN-J
|
The contact termination form is changed to straight PCB type,with PCB grid spacing
1.27*2.54,recommended PCB thickness (1.6-2.5 mm)
|
|
|
Plug J30J-TJN(X)
Receptacle J30J-ZKN(X)
|
Compared with J30J-ZKN/TJN,the pin length is increased,recommended PCB thickness(1.6-3.5 mm)
|
|
